Advanced Irrigation Technologies
102 Series-HEADSAVER® Swing Assemblies
The Headsaver 102 Series shall be used as a component of a flexible device to install ½" (15/21) and ¾" (20/27) inlet sprinklers.



The pipe from the lateral line to the swing assembly shall be 18 inches of flex pvc or k-flex. The tubing shall have a inimum wall thickness of 0.125".



The swing assembly shall be made of the following materials:

½" socket X ½" fipt - Sch. 40 PVC

½" mipt X ½" mipt - High Density Polyethylene

½" fipt X ½" or ¾" mipt - Sch. 40 ABS


Each swing assembly shall be capable of pressure testing at a rate of 150 pounds per square inch (psi) per second to a minimum burst pressure of 240 psi (16,5 Bars). The ½" and ¾" swing assemblies shall be capable of 14 gallons per minute (gpm) maximum (0.90 liters per second).



888-FOR AITI The STRENGTH Down Under